CP102 Single Micro Power Lock With SDGi Bracket

• 680 kg (1500 lb) holding force per lock
• Multiple voltage input – any voltage from 12 vDC to 24 vDC
• Very low current consumption 12 v = 0.28 A and 24 v = 0.14 A
• Early warning alarm EW technology – magnets are fitted with EW pressure sensors able to send an alarm before access forced open with 0-30 second timer delay
• Alarm relay input
• PCB is to be located inside the transom, operator or PSU
• Note that the lock body is rounded and has no sharp edges which gives it a different look and is also ‘safer/less hazardous’ on low height frames
• For open-out doors the lock is fixed to the SDGi bracket allowing infinite adjustment backwards forwards and sideways
• Armature is on a sliding plate allowing 5 mm travel left and right and 1 mm up and down travel to ensure 100% alignment
• Extremely high quality patented lock and bracket system
• Comes completely assembled so all you have to do is install it

Dimensions:

• 116 mm wide on the transom
• 70 mm wide below
• Lock suspends 40 mm below the transom
• Armature is 70 mm W x 26 mm