quantek

Home >> Through Beam Photo cells

CONTACT USContact formRadio remote control system Radio remote control system 868 MHz Advanced radio remote control system 868 MHz BIOMETRIC TRANSMITTERBiometric transmitter ACCESS CONTrOL SYSTEM Standalone 500 user access control with 868 MHz radio receiver Standalone 2000 user access control with 868 MHz radio receiver 13.56 MHz proximty readers, tags and cards Access control software and programming tool GSM remote control TELCON 500 GSM remote control GSM remote control switch Dial2open GSM gate opener ROLLer shutter REMOTE control systemS - 868 MHz Roller shutter remote control Roller shutter remote control and wireless safety edge system Wireless keyswitch and push button Wireless digital keypadROLLER SHUtter controlRoller shutter key and rocker switches Roller shutter group control Wireless safety edge system Wireless safety edge system 2nd Generation wireless safety edge system Photoelectric safety beams Through beam photocells Retro reflective photocells INDUCTIVE VEHICLE LOOP DETECTORVehicle loop detector433 MHz dynamic coDE system radio remote control433 MHz remote control systemsite map Site mapUSEFUL LINKS Links

Through Beam Photoelectric Safety Beams

Through beam photoelectric infra red safety beams, applications include, automatic gates, garage doors, roller shutters and barriers, people detection, and alarm systems
Adjustable lens syncronised anti vandal surface mount photocells - Part No. PC180AV

Anti vandal photoelectric safety beams with self coloured cast metal cover that can be painted to match the gate post or surface it is fixed to. The optical system of both the transmitter and receiver can be rotated up to 180° horizontally which allows side aiming, therefore the units do not have to be mounted face-to-face and the beam direction cannot be discerned by simple observation. Adjustable lens, 180° horizontal and 10° vertical 20 metres range Normally open and normally closed relay contacts contact rating 500mA 48V Supply voltage 12 or 24V ac or dc Beam present LED indicator Operating temperature -20 to 60°C Dimensions 140 x 60 x 40 mm Protection IP55
Fixed lens syncronised surface mount photocells - Part No. PC1
PC1		20 metres range Normally open and normally closed relay contacts, contact rating 1A 24V Supply voltage 12 or 24V ac or dc Beam present LED indicator Operating temperature -20 to 60°C Dimensions 90 x 25 x 45mm IP55
Adjustable lens syncronised surface mount photocells - Part No. PC180
The optical system of both the transmitter and receiver can be rotated up to 180° which allows side aiming, therefore the units do not have to be mounted face-to-face and the beam direction cannot be discerned by simple observation. Adjustable lens, 180° horizontal and 10° vertical 20 metres range Normally open and normally closed relay contacts contact rating 1A 24V Supply voltage 12 or 24V ac or dc Beam present LED indicator Operating temperature -20 to 60°C Dimensions 100 x 30 x 35 mm Protection IP55					PC180
Adjustable lens syncronised surface mount photocells with battery powered transmitter and safety edge input- Part No. PC180B
PC180B installed on a sliding gate providing a wireless link between the safety edge and control panel		The same specification as the the PC180 photocells shown above but with benefit of a battery powered transmitter, the transmitter also has a N.C contact input for connection of a safety edge, the receiver responds as though the infra red beam has been broken when the safety edge is activated. Ideal for use on sliding gates and installations where it is difficult to run a cable to the transmitter Adjustable lens, 180° horizontal and 10° vertical 20 metres range Normally open and normally closed relay contacts, contact rating 1A 24V Signal quality and beam present LED indicators Receiver supply voltage 12 or 24V ac or dc Transmitter power supply 2 x 1.5V AAA alkaline batteries (supplied) - battery life 2 years Operating temperature -20 to 60°C Dimensions 100 x 30 x 35 mm Protection IP55
Fixed lens syncronised flush mount photocells - Part No. PC1-F
PC1F	20 metres range Can be mounted on posts or flush mounted in a wall or gate pillar Normally open and normally closed relay contacts, contact rating 1A 24V Beam present LED indicator Supply voltage 12 or 24V ac or dc Operating temperature -20 to 60°C Dimensions 60mm diameter x 60mm deep Protection IP55 500mm posts available - Part No. COL500

DOCUMENTATION

PC180AV instructions

PC1 instructions

PC180 instructions

PC180B instructions

PC1F instructions
RELATED PRODUCTS

Retroreflective photocells

Wireless safety edge system

Copyright © 2010 Quantek Systems Ltd. All Rights Reserved