2 and 4 channel 868 MHz rolling code transmitters, with APS (approaching system) and SIDE-PROG (cloning), programmable with installer code using the MAESTRO programming transmitter (see below)

Your company logo, name and telephone number can be laser engraved on the front of the transmitter

See overview for details of these features

• 100m range
• Power 3V lithium battery
• Dimensions 62 x 33 x 11 mm

1 and 2 channel miniature 868 MHz radio receivers for adding a remote control facility to automated gates, doors and barriers, built in antenna, IP65 rated so can be used outdoors

• Power supply 12 or 24V ac. dc
• Power consumption, standby18mA, operating 80mA
• 15 code memory, self learning
• N.O momentary relay contacts 1A / 125V ac. dc
• BASE15/2 - Channel 2 relay momentary or bi-stable
• Built in antenna
• Dimensions 125 x 80 x 35 mm
• IP54, IP65 with cable gland

Plug in 868 MHz radio receiver card for adding a remote control facility to our door, gate and barrier control panels

• Power supply 12 or 24V ac. dc - from control panel
• 15 or 500 code memory, self learning
• N.O momentary relay contacts, channel 2 relay momentary or bi-stable
• Built in antenna and external antenna connections
• Dimensions 65 x 38 x 28 mm

Plug in 868 MHz radio receiver card allowing the MOTION range of GO transmitters to be used with other manufacturers control panels

Advantages of the MOTION system are long range, test results have been over 200m. Approacing system, when a transmitter button is pressed it transmits its code for 5 seconds, the status LED then turns off, but the transmitter continues to send its signal at regular intervals for 15 seconds, thereby ensuring maximum transmitter to receiver range is achieved. The ability to add an installer code to transmitters.

• Power supply 12 or 24V ac. dc - from control panel
• 15 code memory, self learning
• N.O momentary relay contact
• Built in antenna and external antenna connections
• Dimensions 65 x 38 x 28 mm

All Manufacturers Trademarks Acknowledged.

Programming tool for adding an installer code to the GO transmitters, once a receiver has registered a transmitter with an installer code, only transmitters containing that installer code will operate the receiver. Supplied with a unique installer code

• Power 3V lithium battery
• Dimensions 62 x 33 x 11 m