|
Transmitters and receivers for adding a remote control facility to automated gates, garage doors etc in domestic or small community installations, for larger community and commercial installations where the ability to manage and control users access is required the Motion advanced remote control system should be used
Operating on the new European permitted frequency of 868.35 MHz exclusively for use by remote controls the MOTION range is not subject to interference from other radio signals such as wireless headphones, walkie-talkies, TETRA emergency communications system, etc |
 |
- APPROACHING SYSTEM (APS) - Innovative APS transmission system, when a transmitter button is pressed it transmits its code for 5 seconds, the status LED then turns off, but the transmitter continues to send its signal at regular intervals for 15 seconds, thereby ensuring maximum transmitter to receiver range is achieved
- SIDE-PROG - Enables the cloning of transmitters, so a new transmitter can be enabled in an installation by simply placing it next to a previously registered transmitter and pressing the buttons on both transmitters
- INSTALLER CODE - A unique installer code can be added to the transmitters, once a receiver has registered a transmitter with an installer code, only transmitters containing that installer code will operate the receiver, this ensures that the original installer benefits from subsequent sales of additional transmitters
- RECEIVER PROGRAMMING - Transmitters can be programmed into the receivers memory
by using the receivers self learning capability, simply press the receivers programme button and then press the transmitter button, the receiver has now memorised the transmitter code, additional transmitters may be enabled using SIDE-PROG
- HIGH SECURITY - Rolling code system using 64 encryption bits resulting in 19 trillion possible codes
- IP65 rated receivers ensures they can be safely be installed outdoors
|
|
