|
Advanced radio transmitters and receivers for adding a remote access control facility to automated community and commercial gates, garage doors etc, with up to 500 users and the ability to manage and control users access.
Operating on the new European permitted frequency of 868.35 MHz exclusively for use by remote controls the MOTION range is not subject to interference from other radio signals such as wireless headphones, walkie-talkies, TETRA emergency communications system, etc
|
 |
- APPROACHING SYSTEM (APS) - Innovative APS transmission system, when a transmitter button is pressed it transmits its code for 5 seconds, the status LED then turns off, but the transmitter continues to send its signal at regular intervals for 15 seconds, thereby ensuring maximum transmitter to receiver range is achieved
- INSTALLER CODE - A unique installer code can be added to the transmitters, once a receiver has registered a transmitter with an installer code, only transmitters containing that installer code will operate the receiver, this ensures that the original installer benefits from subsequent sales of additional transmitters
- TRANSMITTER ID CODE - Each transmitter has a unique identification number electronically embedded and laser engraved on the back enabling users to be identified and managed
- RECEIVER PROGRAMMING - Transmitters may be programmed into the receivers memory
in one of three ways
- Manual programming - using the receivers self learning capability, simply press the receivers programme button and then press the transmitter button, the receiver has now memorised the transmitter code
- Radio programming - using a transmitter that has already been programmed into the receivers memory, it is possible to put the receiver into learn mode and remotely programme additional transmitters (this option can be disabled)
- Computer programming - transmitters can be programmed and the installation managed by using a computer and the ASSISTANT software and programming tool (see below)
|
INSTALLATION CREATION AND MANAGEMENT - The installation can be easily created and users managed using the ASSISTANT programming tool and management software along with a computer, the receivers removeable memory card is plugged into the ASSISTANT, the installation can then be created and managed using the computer software, the memory card is then replaced in the receiver
- Single or sequential programming of transmitter codes, this enables up to 500 codes to be programmed with just a few keystrokes
- Cancellation of codes either individually or in goups, once cancelled the transmitters will no longer be operational in the installation
- Saving, copying, back up and restoring of installations with no limit to the amount of installations
- Universal codes for use by installers and maintenance staff, enables a transmitter to operate in all installations
- Creation and mangement of user lists, it is possible to record users details against their particular transmitter code, for example name, address, telephone number etc, the data fields can be easily customised
- User groups enables you to effectively manage access to different areas of an installation
- Code replacement of lost or stolen transmitter, for example simply program a new transmitter with the code of the lost transmitter plus a replacement code, then simply press the transmitter button whilst on site and the lost transmitter code is deleted and replaced with the new one, the new transmitter is still asigned to the original user
- Reservation of memory slots for future additional users, simply enter the amount of reserves required when creating the installation, the programme will the asign a code to each slot, when a customer orders new transmitters simply select a reserve code in the program add the users details if required, place the transmitter on the ASSISTANT programming tool, the transmitter is now enabled in the system, send the transmitter to the customer
- Export and import user lists for editing in Excel
|
