quantek
Home >> Biometric transmitter

CONTACT USContact formRadio remote control system Radio remote control system 868 MHz Advanced radio remote control system 868 MHz BIOMETRIC TRANSMITTERBiometric transmitter ACCESS CONTrOL SYSTEM Standalone 500 user access control with 868 MHz radio receiver Standalone 2000 user access control with 868 MHz radio receiver 13.56 MHz proximty readers, tags and cardsAccess control software and programming tool GSM remote controlGSM remote control switch Dial2open GSM gate opener ROLLer shutter REMOTE control systemS - 868 MHz Roller shutter remote controlRoller shutter remote control and wireless safety edge system Wireless keyswitch and push buttonWireless digital keypadROLLER SHUtter controlRoller shutter key and rocker switchesRoller shutter group controlWireless safety edge system Wireless safety edge system 2nd Generation wireless safety edge system Photoelectric safety beams Through beam photocellsRetro reflective photocells INDUCTIVE VEHICLE LOOP DETECTORVehicle loop detector433 MHz dynamic coDE system radio remote control433 MHz remote control systemsite map Site mapUSEFUL LINKS Links

Biometric 868 MHz transmitter

4 channel biometric transmitter Part No. GO-BIO

A 4 channel high security biometric transmitter that is activated by passing a finger or thumb over the reading sensor, the sensor reads the fingerprint and compares it to those stored in its memory, if a match is found the transmitter is activated.

Up to 10 finger-prints can be programmed in the transmitters memory and a channel from 1 to 4 assigned to each fingerprint.

biometric transmitter

There are two modes of operation

1. Pass your finger over the sensor and the transmitter transmits on the channel asigned to that fingerprint

2. Press one of the 4 channel buttons and then pass your finger over the sensor and the transmitter will transmit on the channel selected

The GO-BIO will operate with any of the 868 MHz receivers, acess control units and roller shutter control units

Supplied with wall / car dashboard holder

  • Frequency: 868.35 MHz
  • 4 channels
  • Coding method: High security rolling code
  • 10 fingerprint memory
  • Sliding sensor protection cover
  • 3 led status indicators
  • Range: Up to 100 metres
  • Power: 1.5V battery type AAA
  • Dimensions: 76 x 41 x 15 mm


Copyright © 2009 Quantek Systems Ltd. All Rights Reserved