Access Control System Overview

The system comprises stand alone access control units with integrated 868 MHz radio receiver and 13.56 MHz proximity allowing both long and short range access control for up to 2000 users, a range of radio transmitters, proximity tags and cards, and transmitters with proximity.

In addition to controlling access an events memory card can store the last 2000 events time and date stamped, this can be removed and uploaded to a computer for viewing and printing

Each transmitter and proximity tag has a unique identification number electronically embedded and laser engraved on the back enabling users to be identified and managed

See the access control Installation example

INSTALLATION CREATION AND MANAGEMENT

The installation can be easily created and users managed using the ASSISTANT programming tool and management software along with a computer, the access control units removeable memory card is plugged into the ASSISTANT, the installation can then be created and managed using the computer software, the memory card is then replaced in the access control unit.

Many of the functions described below can also be performed using the access control units integrated keypad and display

• Single or sequential programming of transmitter and proximity tag codes, this enables up to 2000 codes to be programmed with just a few keystrokes
  
  
• Cancellation of codes either individually or in goups, once cancelled the transmitters/tags will no longer be operational in the installation
  
  
• Saving, copying, back up and restoring of installations with no limit to the amount of installations
  
  
• Universal codes for use by installers and maintenance staff, enables a transmitter/tag to operate in all installations
  
  
• Creation and mangement of user lists, it is possible to record users details against their particular transmitter/tag code, for example name, address, telephone number etc, the data fields can be easily customised
  
  
• User groups enables you to effectively manage access to different areas of an installation
  
  
• Code replacement of lost or stolen transmitter or tag, for example simply program a new transmitter/tag with the code of the lost one plus a replacement code, then simply press the transmitter button or activate the proximity reader with the tag whilst on site and the lost device code is deleted and replaced with the new one, the new transmitter/tag is still asigned to the original user
  
  
• Reservation of memory slots for future additional users, simply enter the amount of reserves required when creating the installation, the programme will the asign a code to each slot, when a customer orders new transmitters or tags simply select a reserve code in the program add the users details if required, place the transmitter or tag on the ASSISTANT programming tool, the transmitter/tag is now enabled in the system, send the transmitter/tag to the customer
  
  
• Events memory card can be installed in the access control unit, should details of entry or exit be required the events can be viewed by plugging the events card into the ASSISTANT, where details will be shown including user, date, time etc
  
  
• Export and import user lists for editing in Excel
  
  ADDITIONAL PROXIMITY FUNCTIONS
  
  
• Validity date function enables a valid from and an expiry date to be programmed, this can be peformed by the end user using an ASSISTANT programmer and software
  
  
• Kill pass function, when a proximty tags code is flagged with the kill pass command, the next time an attempt is made to use the tag it is destroyed and becomes unusable (not Ecotag)

Back to 500 user access control unit

Back to 2000 user access control unit