Contact formRadio remote control system 868 MHz Advanced radio remote control system 868 MHz Biometric transmitter Standalone 500 user access control with 868 MHz radio receiver Standalone 2000 user access control with 868 MHz radio receiver 13.56 MHz proximty readers, tags and cardsAccess control software and programming tool GSM remote controlTELCON 500 GSM remote controlGSM remote control switch Dial2open GSM gate opener ROLLer shutter REMOTE control systemS - 868 MHz Roller shutter remote controlRoller shutter remote control and wireless safety edge system Wireless keyswitch and push buttonWireless digital keypadRoller shutter key and rocker switchesRoller shutter group controlWireless safety edge system Wireless safety edge system 2nd Generation wireless safety edge system Photoelectric safety beams Through beam photocellsRetro reflective photocells Vehicle loop detector433 MHz remote control systemSite mapLinks
Access Control System Example Installation |
 |
|||||||||||||||||||
A factory with entry and exit road barriers and entry and exit pedestrian turnstiles The access control unit can be configured using the the on board keypad or the Assistant programming tool and software
When the access control unit has been configured using the programming software it is saved to the access control units memory card Programming User Access Each proximity tag* and transmitter** has a unique embedded ID number, this number is also engraved onto the transmitter and tag. Tags and transmitters are supplied boxed sequentially Transmitters and tags can be programmed into the access control units memory by typing the ID number into the user database either individually or sequentially by entering a start and ending ID number, this way up to 2000 tags and transmitters can be programmed with just a few keystrokes. Alternatively the transmitter or tag can be placed on the read/write area on the Assistant where the ID number will be read and placed into the next available memory slot. If required reserve memory slots can be created for future additional users, simply enter the amount of reserves required, the programme will the asign a code to each slot, when a customer orders new transmitters or tags simply select a reserve code in the program add the users details if required, place the transmitter or tag on the Assistant which will enable the tag or transmitter in the system, send to the customer. When the tag / transmitter codes have been programmed the users details can be entered, name, address, telephone number etc there are a number of preset and configurable fields. When all the details have been entered it is saved to the access control units memory card, the card is removed from the Assistant and inserted in the access control unit. Back to 500 user access control unit Back to 2000 user access control unit * Motion Tag and Card proximity only, not the Eco Tag ** GOPRO, GOEVO and GOPRO-MINI only, not the GO-MINI |
|||||||||||||||||||
Access control system overview
Assistant programming and management tool and software
500 user stand alone access control unit
2000 user stand alone access control unit
