quantek
Home >> GSM-AUTO

CONTACT USContact formRadio remote control system Radio remote control system 868 MHz Advanced radio remote control system 868 MHz BIOMETRIC TRANSMITTERBiometric transmitter ACCESS CONTrOL SYSTEM Standalone 500 user access control with 868 MHz radio receiver Standalone 2000 user access control with 868 MHz radio receiver 13.56 MHz proximty readers, tags and cardsAccess control software and programming tool GSM remote controlGSM remote control switch Dial2open GSM gate opener ROLLer shutter REMOTE control systemS - 868 MHz Roller shutter remote controlRoller shutter remote control and wireless safety edge system Wireless keyswitch and push buttonWireless digital keypadROLLER SHUtter controlRoller shutter key and rocker switchesRoller shutter group controlWireless safety edge system Wireless safety edge system 2nd Generation wireless safety edge system Photoelectric safety beams Through beam photocellsRetro reflective photocells INDUCTIVE VEHICLE LOOP DETECTORVehicle loop detector433 MHz dynamic coDE system radio remote control433 MHz remote control systemsite map Site mapUSEFUL LINKS Links

GSM Remote Control Switch

GSM Remote control, SMS Remote control - Part No. GSM-AUTO

The GSM-AUTO is a wireless mobile phone remote control GSM switch that connects to the GSM mobile phone network.

It is activated by calling its mobile telephone number, it will reject the call without answering and switch on or off the device connected to it alternatively the switches can be permanently switched on or off by sending the GSM-AUTO a sms text message

It has 2 independent relay switches with normally open and normally closed relay contacts, these can be programmed to switch on for a pre-determined length of time whenever the GSM-AUTO is called.

Applications include GSM control of heating, lighting, engine pre-heaters, aviation engine pre-heaters, irrigation systems, water well pumps, pumping stations, remote access control of gates , re-setting of remote servers, control of remote scientific instruments

GSM Remote Control Features

  • Quad band GSM-850, GSM-900, GSM-1800, GSM-1900 MHz will work anywhere in the world where there is a GSM network

  • Relay contacts: 2 x normally open (N.O) and normally closed (N.C), maximum switching capacity 10 amps @ 230V ac

  • Power supply required: 12 or 24V dc @ 500 mA

  • Two independent relays that can be programmed to switch on for a period of time between 1 second and 18 hours, programming is achieved by sending the unit text messages

  • The programmed operation can be temporarily overridden and the relays switched on for up to 18 hours by sending the unit a text message command, a confirmation text will be returned when the relay(s) is switched on and another when it is switched off

  • The relays can be permanently switched on or off by sending the GSM-AUTO a text message command, again a confirmation text will be returned

  • A 24 hour timer allows the relays to be switched on and off for a set time, for example relay 1 switches on at 0600 (6am) and off at 1900 (7pm). Once this function is activated the caller ID and override functions are disabled

  • Two access modes are available

    Open access, in this mode the GSM-AUTO will respond to any incoming call.

    Controlled access, up to 99 authorised user telephone numbers can be added to the white list, when this function is activated only the numbers in the white list are able to activate the GSM-AUTO, users can be added and deleted as required using text messages

Frequently asked questions

Do I need a telephone line?

No the GSM-AUTO uses the GSM mobile phone network in the same way as a mobile phone

Will it work anywhere?

It will work anywhere in the world where there is a GSM network and the GSM-AUTO can receive a signal

Can it be activated from another country?

It can be activated from anywhere in the world as long as you have access to a telephone

Can anyone activate the GSM-AUTO by calling it?

Yes and no, the GSM-AUTO can work in open access mode whereby it will respond to any call made to it, or secure access mode when it will only respond to authorised numbers

Do I have to use the T-Mobile SIM card that is supplied with the GSM-AUTO?

No, you can use any networks SIM card

What are the call costs?

The GSM-AUTO uses the mobile phone network and the same as a mobilel phone it has a SIM card, when you call the GSM-AUTO it rejects the call without answering and switches on the device connected to it so there are no call costs incurred. When the GSM-AUTO is initially programmed it sends a confimation sms text message and this will be charged at your network operators rate. A T-Mobile pre-pay (pay as you go) SIM card is supplied so there are no monthly network charges

Do I have to use a mobile phone to activate the GSM-AUTO?

No it can be activated using a landline

ORDERING

If your are located in the EU you can order the GSM-AUTO GSM remote control switch from QUANTEKSHOP

If you are located outside the EU you can order the GSM-AUTO GSM remote control switch at GSM-AUTO.COM

gsm-auto connections

1 + 12 or 24V 12 or 24 volt DC power supply capable of providing a minimum current of 500 mA
2 - 0V
3 COMMON (COM) RELAY 2
4 NORMALLY CLOSED (N.C)
5 NORMALLY OPEN (N.O)
6 NORMALLY CLOSED (N.C) RELAY 1
7 NORMALLY OPEN (N.O)
8 COMMON (COM)

 

GSM CONTROL SPECIFICATIONS
Power supply 12 or 24V DC
Power consumption Maximum during communication 500mA, typically 50mA
Relay contacts 2 x Normally Open and Normally Closed contacts maximum switching capacity 10 amps @ 230V ac
GSM Bands GSM-850, GSM-900, GSM-1800, GSM-1900
Operating temperature -20°C to 55°C
Physical size 130 x 100 x 50 mm
Protection IP 65
Approvals CE

GSM-AUTO Mobile phone remote control


DOCUMENTATION



GSM-AUTO Instruction manual

Data sheet
Copyright © 2009 Quantek Systems Ltd. All Rights Reserved